standard export package or wooden box
1 - 5000
To be negotiated
High hardness tungsten carbide water jet cutter carbide nozzle direct
Zhuzhou Good Cemented Carbide Co., Ltd is one of the most professional cemented carbide manufacturer over 10 years. we have rich experience in both production carbide products from material to sintered to machining to finished products step by step. Europe, Asia, Africa, and Middle East are our current markets.
Product Description :
We can provide you all kinds of high performance nozzles, such as spray nozzles,
oil nozzles, blasting nozzles and so on.
With high speed to wash, well wear resistance,
excellent corrosion resistance
1. Product Description:
Water Jet Cutting is an industrial manufacturing technique that uses a very highly pressurized
stream of water to cut through just about it anything.
TUNGSTEN CARBIDE NOZZLES are usually considered to be the most durable of all material
types. In cases of dirty unfiltered water, they are the most durable. In applications where flow rates
exceed 190 lpm (50 gpm) or more, water may not be filtered and these users typically get the
longest life from carbide nozzles.
3. Advantages of tungsten carbide water jet nozzle:
-- Superior wear resistance
Which means a reduction in the number of nozzles purchased over time
This allows faster average cutting speeds and significantly reduced system downtime for nozzle
re-placement and system calibration
These performance enhancements combine to make the entire cutting process more cost-effective.
Our Nozzle mainly used in below areas:
1.Application inagricultural irrigation and urban greening.
2.Applicationin geological prospecting, machinery or tool.
3.manufacturing and serves as drill bit in wind drill and electric drillfor coaldigging.
4.Fit for precision lathe are used in nonstop cutting of die-cast iron.
TIPS ! ! !
Q:What is cemented carbide ?
A:Cemented carbide is a hard material used in machining tough materials such as carbon steel or
stainless, as well as in situations where other tools would wear away, such as high-quantity
production runs. Most of the time, carbide will leave a better finish on the part, and allow faster
machining. Carbide tools can also withstand higher temperatures than standard high speed steel tools.
Q:What is the difference between cemented and tungsten carbide?
A:Cemented carbides consist of hard grains of the carbides of transition metals (Ti, V, Cr, Zr, Mo,
Nb, Hf, Ta, and/or W) cemented or bound together by a softer metallic binder consisting of Co,
Ni, and/or Fe (or alloys of these metals). Tungsten carbide (WC), on the other hand, is a compound
of W and C. Since most of the commercially important cemented carbides are based on WC as
the hard phase, the terms "cemented carbide" and "tungsten carbide" are often used interchangeably.
Q: How can I choose the most suitable products for my applications?
A: 1. Correct installation site depends on specific size and drawings. Especially for dies processing,
drawings can ensure the finished products are qualified.
2. Processing objects and working environment is determined by cemented carbide grades.
Products' lifetime can be greatly extend if grades are right.
If you have any question ,please contact me ,we will do my best service for you .